Current Position : 主页 > News > Technical articles
How to Adjust the Discharging Size of the Hammer Crusher?
Technical articles

How to Adjust the Discharging Size of the Hammer Crusher?

Origin:未知    Date:2017-03-07 03:29    Size:Small Medium Big

Hammer crusher is used to crush the high hardness of the ore, according to the customer's request for coarse or crushing, which makes the material control requirements of hammer crusher a little higher. It is necessary to control the size of the hammer crusher.

Too large or too small will affect the progress of production and material quality, and can not meet the customer requirements of the fineness then our benefits will have a bad impact. We can analyze the size of the hammer crusher, and how to adjust the preparation.

According to the previous transformation and upgrading of the crusher, we summed up the hammer crusher material too large particle size. One is the hammer wear and tear, one is the screen bar rupture. Hammer is an important part of the hammer crusher, it is in direct contact with the material. If the material hardness is too large, will be more severe hammer wear perennially. Hammer will be subject to material friction damage, this time the hammer on the material broken blow will not work, resulting in material size is too large. In response to this situation, we have to replace the hammer of limestone hammer crusher, in order to ensure the normal work of the hammer crusher to ensure uniformity of the material, to ensure its quality.

Sieve bar breakage, when the material is too large or too much, will be limestone hammer crusher grate plate for a strong impact, resulting in broken screen bar, so that the material size is too large. In this case, we have to replace the new grate plate device.

If the hammer crusher of the material size and customer requirements compared to too small, because there is no adjustment, as long as the skilled operation can be adjusted in place. Please rest assured to buy Huashengming's hammer crusher.